G1-300B-85-2.0
Model | G1-300B-85-2.0 |
Description | Processor Series Low Power Integrated x86 Solution |
PDF file | Total 247 pages (File size: 4M) |
Chip Manufacturer | NSC |
Geode™ GX1 Processor Series
Integrated Functions
(Continued)
4.7
PCI CONTROLLER
4.7.4 Generating Configuration Cycles
Configuration space is a physical address space unique to
PCI. Configuration Mechanism #1 must be used by soft-
ware to generate configuration cycles. Two DWORD I/O
locations are used in this mechanism. The first DWORD
location (CF8h) references a read/write register that is
named CONFIG_ADDRESS. The second DWORD
address
(CFCh)
references
a
register
named
CONFIG_DATA. The general method for accessing config-
uration space is to write a value into CONFIG_ADDRESS
that specifies a PCI bus, a device on that bus, and a config-
uration register in that device being accessed. A read or
write to CONFIG_DATA will then cause the bridge to trans-
late that CONFIG_ADDRESS value to the requested con-
figuration cycle on the PCI bus.
4.7.5 Generating Special Cycles
A special cycle is a broadcast message to the PCI bus.
Two hardcoded special cycle messages are defined in the
command encode: HALT and SHUTDOWN. Software can
also generate special cycles by using special cycle genera-
tion for configuration mechanism #1 as described in the
PCI Specification 2.1 and briefly described here. To initiate
a special cycle from software, the host must write a value
to CONFIG_ADDRESS encoded as shown in Table 4-40.
The next value written to CONFIG_DATA is the encoded
special cycle. Type 0 or Type 1 conversion will be based on
the Bus Bridge number matching the GX1 processor’s bus
number of 00h.
The GX1 processor includes an integrated PCI controller
with the following features.
4.7.1 X-Bus PCI Slave
•
16-byte PCI write buffer
•
16-byte PCI read buffer from X-bus
•
Supports cache line bursting
•
Write/Inv line support
•
Pacing of data for read or write operations with X-bus
•
No active byte enable transfers supported
4.7.2 X-Bus PCI Master
•
16 byte X-bus to PCI write buffer
•
Configuration read/write Support
•
Int Acknowledge support
•
Lock conversion
•
Support fast back-to-back cycles as slave
4.7.3 PCI Arbiter
•
Fixed, rotating, hybrid, or ping-pong arbitration
(programmable)
•
Support four masters, three on PCI
•
Internal REQ for CPU
•
Master retry mask counter
•
Master dead timer
•
Resource or total system lock support
Table 4-40. Special Cycle Code to CONFIG_ADDRESS
1
31
1
CONFIG
ENABLE
30
24 23 22 21 20 19 18 17 16 15 14 13 12 11 10
Bus No. = Bridge
BUS NUMBER
1
1
1
1
1
1
9
1
8
1
7
0
6
0
5
0
4
0
3
0
2
0
TRANS-
LATION
TYPE
1
0
0000000
RSVD
DEVICE NUMBER
FUNCTION
NUMBER
REGISTER NUMBER
1.
See Table 4-41 on page 168, bits [1:0] for translation type.
Revision 1.0
167
www.national.com