U1AFS600-1PQG208
| Model | U1AFS600-1PQG208 |
| Description | Field Programmable Gate Array, |
| PDF file | Total 334 pages (File size: 18M) |
| Chip Manufacturer | MICROSEMI |
Datasheet Information
Revision
Preliminary v1.7
(October 2008)
Changes
The version number category was changed from Advance to Preliminary, which
means the datasheet contains information based on simulation and/or initial
characterization. The information is believed to be correct, but changes are possible.
For the VIL and VIH parameters, 0.30 * VCCI was changed to 0.35 * VCCI and 0.70
* VCCI was changed to 0.65 * VCCI in
Page
Preliminary v1.7
(continued)
The version number category was changed from Advance to Preliminary, which
means the datasheet contains information based on simulation and/or initial
characterization. The information is believed to be correct, but changes are possible.
The following updates were made to
Temperature
213
283
Digital Output
00 1111 1101
01 0001 1011
N/A
358
01 0110 0110 – only the digital output was updated.
Temperature 358 remains in the temperature column.
In Advance v1.2, the
pin description was
significantly updated but the change was not noted in the change table.
Advance v1.6
(August 2008)
The title of the datasheet changed from Actel Programmable System Chips to Actel
Fusion Mixed Signal FPGAs. In addition, all instances of programmable system chip
were changed to mixed signal FPGA.
N/A
The references to the
Peripherals User’s Guide
in the
"No-Glitch MUX (NGMUX)" 2-32, 2-42
section
and
"Voltage Regulator Power Supply Monitor (VRPSM)" section
were
changed to
Fusion Handbook.
Advance v1.5
(July 2008)
The following bullet was updated from High-Voltage Input Tolerance: ±12 V to High-
Voltage Input Tolerance: 10.5 V to 12 V.
The following bullet was updated from Programmable 1, 3, 10, 30 µA and 25 mA
Drive Strengths to Programmable 1, 3, 10, 30
µ
A and 20 mA Drive Strengths.
This bullet was added to the
"Integrated A/D Converter (ADC) and Analog I/O"
section:
ADC Accuracy is Better than 1%
In the
"Integrated Analog Blocks and Analog I/Os" section,
±4 LSB was changed to
0.72. The following sentence was deleted:
The input range for voltage signals is from –12 V to +12 V with full-scale output
values from 0.125 V to 16 V.
In addition, 2°C was changed to 3°C:
"One analog input in each quad can be connected to an external temperature
monitor diode and achieves detection accuracy of ±3ºC."
The following sentence was deleted:
The input range for voltage signals is from –12 V to +12 V with full-scale output
values from 0.125 V to 16 V.
The title of the datasheet changed from Actel Programmable System Chips to Actel
Fusion Mixed Signal FPGAs. In addition, all instances of programmable system chip
were changed to mixed signal FPGA.
Advance v1.4
(July 2008)
In
Table 3-8 · Quiescent Supply Current
references were updated for I
DC2
and I
DC3
.
Characteristics
(IDDQ)1,
footnote
N/A
1-4
I
I
I
3-11
Footnote 3 and 4 were updated and footnote 5 is new.
5-6
R e vi s i o n 2
