U1AFS600-2FG256YI
| Model | U1AFS600-2FG256YI |
| Description | Field Programmable Gate Array, |
| PDF file | Total 334 pages (File size: 18M) |
| Chip Manufacturer | MICROSEMI |
DC and Power Characteristics
Table 3-1 •
Absolute Maximum Ratings (continued)
Symbol
AV, AC
Unpowered,
unconfigured
Parameter
ADC
reset
asserted
or
Commercial
–11.0 to 12.6
–0.4 to 12.6
–0.4 to 3.75
–11.0 to 0.4
–3.75 to 0.4
–0.4 to 3.75
–0.4 to 12.6
ADC
reset
asserted
or
–11.0 to 12.6
–0.4 to 12.6
–11.0 to 0.4
–11.0 to 12.6
reset
asserted
or
–0.4 to 16.0
–0.4 to 16.0
–0.4 to 3.75
–0.4 to 16.0
Industrial
–11.0 to 12.0
–0.4 to 12.0
–0.4 to 3.75
–11.0 to 0.4
–3.75 to 0.4
–0.4 to 3.75
–0.4 to 12.0
–11.0 to 12.0
–0.4 to 12.0
–11.0 to 0.4
–11.0 to 12.0
–0.4 to 15.0
–0.4 to 15.0
–0.4 to 3.75
–0.4 to 15.0
–65 to +150
+125
Units
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
°C
°C
Analog input (+16 V to +2 V prescaler range)
Analog input (+1 V to +0.125 V prescaler
range)
Analog input (–16 V to –2 V prescaler range)
Analog input (–1 V to –0.125 V prescaler
range)
Analog input (direct input to ADC)
Digital input
AG
Unpowered,
unconfigured
Low Current Mode (1 µA, 3 µA, 10 µA, 30 µA)
Low Current Mode (–1 µA, –3 µA, –10 µA, –30
µA)
High Current Mode
3
AT
Unpowered,
unconfigured
ADC
Analog input (+16 V, 4 V prescaler range)
Analog input (direct input to ADC)
Digital input
T
STG 4
T
J 4
Notes:
Storage temperature
Junction temperature
1. The device should be operated within the limits specified by the datasheet. During transitions, the input signal may
undershoot or overshoot according to the limits shown in
Table 3-4 on page 3-4.
2. Analog data not valid beyond 3.65 V.
3. The high current mode has a maximum power limit of 20 mW. Appropriate current limit resistors must be used, based on
voltage on the pad.
4. For flash programming and retention maximum limits, refer to
Table 3-5 on page 3-5.
For recommended operating limits
refer to
Table 3-2 on page 3-3.
3-2
R e vi s i o n 3
