U1AFS600-2FG256YI
| Model | U1AFS600-2FG256YI |
| Description | Field Programmable Gate Array, |
| PDF file | Total 334 pages (File size: 18M) |
| Chip Manufacturer | MICROSEMI |
Datasheet Information
Revision
Revision 2
(continued)
Changes
The reference to guidelines for global spines and VersaTile rows, given in the
was corrected to t
he
"Spine Architecture" section of the Global Resources chapter in the
Fusion
FPGA Fabric User's Guide
(SAR 34741).
Package names used in the
were revised to
match standards given in
(SAR 36612).
Page
N/A
July 2010
The versioning system for datasheets has been changed. Datasheets are assigned
a revision number that increments each time the datasheet is revised. The
indicates the status for each device in the device family.
The MicroBlade and Fusion datasheets have been combined. Pigeon Point
information is new.
CoreMP7 support was removed since it is no longer offered.
–F was removed from the datasheet since it is no longer offered.
The operating temperature was changed from ambient to junction to better reflect
actual conditions of operations.
Commercial: 0°C to 85°C
Industrial: –40°C to 100°C
The version number category was changed from Preliminary to Production, which
means the datasheet contains information based on final characterization. The
version number changed from Preliminary v1.7 to v2.0.
The
was updated to include a
reference to the "Analog System Characteristics" section in the
chapter of the datasheet, which includes
Table 2-46 • Analog Channel Specifications
and specific voltage data.
The phrase "Commercial-Case Conditions" in timing table titles was changed to
"Commercial Temperature Range Conditions."
The
was updated significantly. Please review carefully.
The
was updated significantly.
Please review carefully.
There was a typo in
for the
ERASEPAGE description; it was the same as DISCARDPAGE. As as a result, the
ERASEPAGE description was updated.
The t
FMAXCLKNVM
parameter was updated in
and
were updated.
In
the Function description for PWRDWN
was changed from "Comparator power-down if 1"
to
"ADC comparator power-down if 1. When asserted, the ADC will stop functioning,
and the digital portion of the analog block will continue operating. This may result in
invalid status flags from the analog block. Therefore, Microsemi does not
recommend asserting the PWRDWN pin."
was updated.
The
was updated. Please review carefully.
and
are new.
v2.0, Revision 1
(July 2009)
N/A
N/A
5-4
R e vi s i o n 3
