MC9S12XDP512CFU
Model | MC9S12XDP512CFU |
Description | 16-BIT, FLASH, 40MHz, MICROCONTROLLER, PQFP80 |
PDF file | Total 1348 pages (File size: 8M) |
Chip Manufacturer | PHILIPS |
Chapter 21 External Bus Interface (S12XEBIV2)
21.5.2.2
Example 2b: Emulation Expanded Mode
This mode is used for emulation systems in which the target application is operating in normal expanded
mode.
If the external bus is used with a PRU, the external device rebuilds the data select and data direction signals
UDS, LDS, RE, and WE from the ADDR0, LSTRB, and R/W signals.
Figure 21-6
shows the PRU connection with the available external bus signals in an emulator application.
S12X_EBI
ADDR[22:0]/IVD[15:0]
DATA[15:0]
EMULMEM
Emulator
PRU
PRR
Ports
LSTRB
R/W
UDS
LDS
RE
WE
ADDR[22:20]/ACC[2:0]
ADDR[19:16]/
IQSTAT[3:0]
EWAIT
ECLK
ECLKX2
CS[2:0]
Figure 21-6. Application in Emulation Expanded Mode
The timings of accesses with 1 stretch cycle are shown in
• Figure ‘Example 2b: Emulation Expanded Mode — Read with 1 Stretch Cycle’
• Figure ‘Example 2b: Emulation Expanded Mode — Write with 1 Stretch Cycle’
The associated timing numbers are given in
• Table ‘Example 2b: Emulation Expanded Mode Timing V
DD5
= 5.0 V (EWAITE = 0)’ (this also
includes examples for alternative settings of 2 and 3 additional stretch cycles)
Timing considerations:
• If no stretch cycle is added, the timing is the same as in Emulation Single-Chip Mode.
MC9S12XDP512 Data Sheet, Rev. 2.21
Freescale Semiconductor
805