• Inventory
  • Products
  • Technical Information
  • Circuit Diagram
  • Data Sheet
Data Sheet
Home > Data Sheet > S912XEG128J2VAL
S912XEG128J2VAL

S912XEG128J2VAL

Model S912XEG128J2VAL
Description IC,MICROCONTROLLER,16-BIT,CPU12 CPU,CMOS,QFP,112PIN,PLASTIC
PDF file Total 1327 pages (File size: 7M)
Chip Manufacturer ROCHESTER
Chapter 8 S12X Debug (S12XDBGV3) Module
8.3.2.8.5
Address: 0x002C
7
Debug Comparator Data High Register (DBGXDH)
Because of an order from the United States International Trade Commission, BGA-packaged product lines and part numbers indicated here currently are not
available from Freescale for import or sale in the United States prior to September 2010: S12XE products in 208 MAPBGA packages
6
5
4
3
2
1
0
R
W
Reset
Bit 15
0
Bit 14
0
Bit 13
0
Bit 12
0
Bit 11
0
Bit 10
0
Bit 9
0
Bit 8
0
Figure 8-18. Debug Comparator Data High Register (DBGXDH)
Read: Anytime. See
Table 8-29
for visible register encoding.
Write: If DBG not armed. See
Table 8-29
for visible register encoding.
Field
7–0
Bits[15:8]
Description
Comparator Data High Compare Bits
— The Comparator data high compare bits control whether the selected
comparator compares the data bus bits [15:8] to a logic one or logic zero. The comparator data compare bits are
only used in comparison if the corresponding data mask bit is logic 1. This register is available only for
comparators A and C.
0 Compare corresponding data bit to a logic zero
1 Compare corresponding data bit to a logic one
8.3.2.8.6
Address: 0x002D
7
Debug Comparator Data Low Register (DBGXDL)
6
5
4
3
2
1
0
R
W
Reset
Bit 7
0
Bit 6
0
Bit 5
0
Bit 4
0
Bit 3
0
Bit 2
0
Bit 1
0
Bit 0
0
Figure 8-19. Debug Comparator Data Low Register (DBGXDL)
Read: Anytime. See
Table 8-29
for visible register encoding.
Write: If DBG not armed. See
Table 8-29
for visible register encoding.
Field
7–0
Bits[7:0]
Description
Comparator Data Low Compare Bits
— The Comparator data low compare bits control whether the selected
comparator compares the data bus bits [7:0] to a logic one or logic zero. The comparator data compare bits are
only used in comparison if the corresponding data mask bit is logic 1. This register is available only for
comparators A and C.
0 Compare corresponding data bit to a logic zero
1 Compare corresponding data bit to a logic one
MC9S12XE-Family Reference Manual Rev. 1.19
Freescale Semiconductor
323
Go Upload

* Only PDF files are allowed for upload

* Enter up to 200 characters.